Lift down? Call Harry directly. Same-day weekday callouts.

Our portfolio

EVERY JOB FROM
THE FIELD

23 published platform lift, stairlift and through-floor lift jobs across London, Kent and the South East, every one with photographs from site. Work on Motala, Aritco, Cibes, Wessex, Stannah and more. Filter by commercial or residential to find the job that matches yours.

The archive

BROWSE THE JOBS

Click any job to read what the fault was, what we found and what it took to put right.

23 jobs shown

Vimec E10 CPU and Cabin Board Replacement

ResidentialColchester

Home Lift Repair

Vimec E10 CPU and Cabin Board Replacement

Reed Lifts fitted a new CPU and cabin board to a Vimec E10 home lift in Colchester for a customer who urgently needed access upstairs to bed.

Read the full job

Motala MC2000 Retiring Ramp Replacement

Platform Lift Repair

Motala MC2000 Retiring Ramp Replacement

Reed Lifts diagnosed and fitted a replacement retiring ramp to a Motala MC2000 platform lift in Romford.

Read the full job

Terry's Home Lift Underpan Spring Replacement

ResidentialRichmond

Home Lift Repair

Terry's Home Lift Underpan Spring Replacement

Reed Lifts fitted new underpan springs to a Terry's home lift in Richmond. Read about the repair and contact Harry about a similar job.

Read the full job

Brooks 130 Reconditioned Stairlift Installation

ResidentialGravesend, KentJuly 2026

Residential Stairlift Installation

Brooks 130 Reconditioned Stairlift Installation

Supply and installation of a fully reconditioned Brooks 130 straight-rail stairlift in a private home in Gravesend. A lot of people see the price of a brand new stairlift and assume that is the only way in. It isn't. A good reconditioned unit, fully checked over and fitted properly, runs just as smoothly and safely as new, for a fair bit less money.

Straight rail, tidy install, and someone getting up and down their own stairs safely again in their own home.

Read the full job

Aritco Platform Lift: Manual to Automatic Door Conversion

Commercial6 May 2026

Commercial Lift Upgrade

Aritco Platform Lift: Manual to Automatic Door Conversion

Door upgrade on an Aritco Platform Lift, converting manual doors to fully automatic door operators across all three floors. The install was completed with minimal downtime, leaving the lift with seamless automatic door operation and improved accessibility for everyone using it.

Manual doors successfully converted to automatic across all three floors with minimal downtime.

Read the full job

Barduva SB200 Inverter Replacement

CommercialBeckenham, London · BR36 May 2026

Commercial Lift Repair

Barduva SB200 Inverter Replacement

Inverter replacement on a Barduva SB200 lift. The faulty inverter was removed, the new unit fitted and wired in, and a full calibration run completed before the lift was tested and returned to service.

Lift returned to service after inverter replacement and full calibration.

Read the full job

Motala MC2000 Gearbox Replacement

CommercialWoolwich, London · SE1821 April 2026

Commercial Lift Repair

Motala MC2000 Gearbox Replacement

Full gearbox replacement on a Motala MC2000 lift. After isolating the lift and securing it at the top floor, the motor and original gearbox were removed, all key surfaces cleaned and re-greased, and the new gearbox installed. The lift was rebuilt and tested on the same day.

Lift returned to safe, reliable service.

Read the full job

Acorn 180 Stairlift Overhaul

ResidentialBromley, London · BR116 April 2026

Residential Stairlift Repair

Acorn 180 Stairlift Overhaul

Overspeed governor (OSG) replacement and full service on an Acorn 180 stairlift at a private residence. A new OSG was installed alongside a complete clean of the pinion and the full roller assembly. The unit was tested and returned to operation the same afternoon.

Stairlift restored to safe, dependable daily use.

Read the full job

Motala MC2000 OSG Replacement (One-Day Turnaround)

CommercialApril 2026

Commercial Lift Repair

Motala MC2000 OSG Replacement (One-Day Turnaround)

Motala MC2000 overspeed governor replacement completed in under a day. Full Motala safety gear solution delivered to site, with diagnostics, removal, and refit all carried out within a single working day to keep downtime to a minimum.

Lift returned to service in under a day after full OSG replacement.

Read the full job

Cibes Platform Lift Diagnostics & Repair

CommercialApril 2026

Commercial Lift Repair & Service

Cibes Platform Lift Diagnostics & Repair

Diagnostics, servicing, and repair work across multiple Cibes platform lifts. Each lift was assessed, parts sourced where needed, and reliable repairs carried out to return the units to dependable service with minimal downtime.

Cibes lifts diagnosed, repaired, and returned to dependable service.

Read the full job

Stannah 260 Stairlift Carriage Roller Set Replacement

ResidentialMarch 2026

Residential Stairlift Service

Stannah 260 Stairlift Carriage Roller Set Replacement

Carriage roller set replacement on a Stannah 260 stairlift at a private residence. While the lift was removed, the rail was split, all joints greased, and every component refitted precisely to manufacturer specification. Preventative attention to detail like this helps maintain smooth operation and extend equipment lifespan.

Stairlift returned to smooth, reliable daily use after preventative service and roller replacement.

Read the full job

Routine Lift Service & Safety Inspection

CommercialMarch 2026

Commercial Lift Service

Routine Lift Service & Safety Inspection

Routine service and safety inspection on a commercial lift. The drive components were examined and serviced, the internal mechanisms checked, and the emergency lowering systems verified. Beyond the visible work, the priority is the intricate safety verification that protects the people who rely on the lift every day.

Lift verified safe and reliable through full mechanical and safety inspection.

Read the full job

NAMI 400 Platform Lift Belt Change & Service

CommercialFebruary 2026

Commercial Lift Service

NAMI 400 Platform Lift Belt Change & Service

Belt change and minor service on a NAMI 400 platform lift. The drive belts were inspected and replaced, the unit serviced, and a full safety inspection completed before the lift was returned to service.

Lift returned to compliant, safe operation after belt change and full service.

Read the full job

Motala MC2000 Monday Morning Diagnosis

CommercialFebruary 2026

Commercial Lift Repair

Motala MC2000 Monday Morning Diagnosis

Monday morning callout to a Motala MC2000 lift marked out of service. After 3.5 hours of travel, the fault was diagnosed and rectified within 30 minutes on site, and the lift returned to full service.

Lift returned to service in 30 minutes on site after Monday morning travel.

Read the full job

Two Trailing Cable Replacements in One Day

CommercialJanuary 2026

Commercial Lift Repair

Two Trailing Cable Replacements in One Day

Trailing cable replacement on two separate lifts in a single day. The first was a single-phase lift with an inverter, the second a three-phase lift without. Both cables were inspected, removed, and replaced before functional testing and return to service. Both jobs finished ahead of schedule.

Two lifts returned to service in a single day, both ahead of schedule.

Read the full job

17-Hour Day: Door Frame, OSG, and Stair Scaffold Repairs

Multi-Site Service & Repair

17-Hour Day: Door Frame, OSG, and Stair Scaffold Repairs

A demanding 17-hour day across multiple sites. A damaged door frame was refixed, an OSG replaced on a Motala MC2000 lift, and a stair scaffold repair carried out on a home lift. Each repair was completed to manufacturer specification, tested, and returned to service before the day ended.

Three complex repairs finished and lifts returned to service in a single day.

Read the full job

Loading Bay Lift Entrapment Callout

CommercialDecember 2025

Commercial Emergency Callout

Loading Bay Lift Entrapment Callout

Emergency callout to a loading bay lift where multiple landing doors were failing to unlock, causing entrapment situations and requiring immediate response. The current collectors were removed, cleaned, recalibrated, and refitted to restore correct contact and signalling. Functional checks and safety verification were completed before the lift was returned to stable, compliant operation.

Lift returned to safe, compliant operation after current collector recalibration.

Read the full job

Stannah Midi Lift DDA Compliance Upgrade

CommercialNovember 2025

Commercial Lift Upgrade

Stannah Midi Lift DDA Compliance Upgrade

Door operator and kinetic button upgrade on a Stannah midi lift at a library site. The new power door operator allows full independent use by all users, and kinetic buttons were fitted to avoid running new cables and trunking through the building. The operators were programmed to bring the lift into full DDA compliance and to ensure smooth operation on every cycle.

Lift upgraded to full DDA compliance with new power door and kinetic buttons.

Read the full job

Motala MC2000 & Vimec E10 OSG Replacements

CommercialNovember 2025

Commercial Lift Repair

Motala MC2000 & Vimec E10 OSG Replacements

Overspeed governor replacement on a Motala MC2000 lift, plus a Vimec E10 OSG replacement on a separate site, completed across the same week. Five days of work covering 1,200 miles between locations. Each lift was rebuilt, calibrated, and returned to service.

Both lifts returned to service after OSG replacement and full calibration.

Read the full job

Multi-Lift Service Day: Wessex & Stannah

Multi-Site Service & Repair

Multi-Lift Service Day: Wessex & Stannah

A multi-site service day. Diagnosed a Stannah midi lift that had been out of service for several months, with replacement parts ordered for follow-up. Repaired a Wessex step lift and returned it to service, then surveyed the same site for a fully enclosed platform lift replacement. Returned two Wessex homelifts to service from van stock.

Four lifts back in service in a single day, fifth diagnosed and staged for parts.

Read the full job

Two Motala Lifts Repaired in One Day

CommercialSeptember 2025

Commercial Lift Repair

Two Motala Lifts Repaired in One Day

Two Motala lift repairs in one day. The first was diagnosed with faulty relays, with replacement parts ordered for follow-up. The second presented with loud knocking, scraping in the shaft, and intermittent faults, found to be a damaged magnetic switch bracket with mag switches out of position. The lift was stripped, the bracket repaired and reinstalled, and the shaft rebuilt and tested.

Lift returned to safe operation after mag switch bracket repair and full shaft rebuild.

Read the full job

Aritco 9000 Trailing Cable Replacement

CommercialAugust 2025

Commercial Lift Repair

Aritco 9000 Trailing Cable Replacement

Trailing cable replacement on an Aritco 9000 platform lift. The original cable was inspected, removed, and replaced before the lift was tested and returned to service.

Lift returned to safe, reliable service.

Read the full job

Stannah Stairlift Repair

ResidentialAugust 2025

Residential Stairlift Repair

Stannah Stairlift Repair

Stairlift repair at a private residence. The Stannah unit was diagnosed and the internal components inspected, repaired, and reassembled. The lift was tested and returned to dependable daily use.

Stairlift restored to safe, dependable daily use.

Read the full job

GOT SOMETHING SIMILAR?

Tell Harry what your lift is doing. Most faults can be narrowed down over the phone before anyone gets in a van.

01474 612019 WhatsApp Harry Request a Quote

Same-day callouts on weekdays. You speak to the engineer, not a call centre.

Call Harry WhatsApp